Hi, what are you looking for?
NREL-Led Breakthrough Pushes Perovskite Solar Cell to Greater Stability & Efficiency
Federal Working Group: Rapid Response Team to Support Energy Communities in The Four Corners
How to Start Your Career in Clean Energy
Off Grid, Big House — No Worries
Tesla Data Inform World-First Study
Federal Working Group: Rapid Response Team to Support Energy Communities in The Four Corners
How to Start Your Career in Clean Energy
Tesla Data Inform World-First Study
Electrolyzer Supply to Increase Green Hydrogen Availability
Biden–Harris Admin Launches New Offices to Lower Energy Costs & Deploy Clean Power Nationwide
New Lithium StoryMap & the Future of Electrification
Enhanced Geothermal Technology Cracks The 24/7 Energy Code
Decarbonizing Data Centers — It’s Fun!
Most Renewables Now Cheaper Than Cheapest Coal
Kenya Elections: Electric Mobility, Utility Scale Battery Storage, Energy Efficiency & Green Hydrogen Feature Prominently
How Bad Is The Battery Manufacturing Process For EVs?
Off Grid, Big House — No Worries
Questions About IRA Benefits? Rewiring America Has The Answers
Biden-Harris Admin Launches $675 Million Bipartisan Infrastructure Law Program to Expand Domestic Critical Materials Supply Chains
10 Big Cleantech Benefits in Inflation Reduction Act
Biden–Harris Admin Launches $10.5 Billion Investment to Strengthen America’s Electric Grid
Electric Vehicles Don’t Break The Grid, And They Can Help Boost It
Stryten Energy Applauds Investments in Energy Security & U.S. Manufacturers With Passage Of Inflation Reduction Act
First V2G (Vehicle to Grid) System on Launches NYC Grid
Comparing The US & China On Climate, Economy, & Other Outcomes Should Be Deeply Humbling For America
Understanding The High Efficiency Electric Home Rebate Act (HEEHRA)
Questions About IRA Benefits? Rewiring America Has The Answers
10 Big Cleantech Benefits in Inflation Reduction Act
A Cheap Clean RV Option Emerges
Why It Makes Sense To Put A Transmission In Dodge’s Upcoming EV Muscle Cars
Chinese Province of 9 Million+ to Ban Fossil Fuel Car Sales by 2030
Ford F-150 Lightning’s Top Conquest Sales: Ram Pickup and Tesla Model 3 & Model X
After Banning Gas Cars, California Tells EV Drivers to Hold Back on Charging
Round Two: Illinois Electric Motorcycle Rebate
Polestar 6 Roadster Sells Out in One Week!
Gooloo GTX 280 Compact Power Station — CleanTechnica Review
CleanTechnica Tested: Vanpowers Super Power Pro 2000 Portable Power Station
Lion Safari UT 1300 Battery Review
CleanTechnica Tested: The Lion Safari ME Portable Power Station
Tesla Aero Hubcap Replacement: Hub & Lug Nut Covers — Quick Installation & Review (Video)
Sweden Plugin EV Share At 46.1% In August
Tesla Model Y & Model 3 Two Best Selling Vehicles In California
Electric Vehicles = 10% of New Vehicle Sales Globally!
Top 10 Cities For Solar Power Per Capita in USA — Charts
Which Legacy Automaker Is Selling Most EVs As Portion Of Overall Sales In USA?
Gooloo GTX 280 Compact Power Station — CleanTechnica Review
CleanTechnica Tested: Vanpowers Super Power Pro 2000 Portable Power Station
Lion Safari UT 1300 Battery Review
CleanTechnica Tested: The Lion Safari ME Portable Power Station
Tesla Aero Hubcap Replacement: Hub & Lug Nut Covers — Quick Installation & Review (Video)
2022 Nissan Leaf S Plus — CleanTechnica Review (VIDEO)
Ford F-150 Lightning — CleanTechnica Review
Tesla Q4 Shareholder Conference Call — Watch & Listen Here
Volkswagen Group — In-Depth Conference Call Highlights Company’s Focus On Transition
Bill McKibben On Unions, Tesla, & Elon Musk — CleanTechnica Interview
Three-Dimensional Printing of Thermoplastic Blades Enables Thermal Welding, Improves Recyclability
Wind turbine blades might look elegant, even ballet-like, as they glide through the air. But, much like ballet, achieving that simple grace requires complex, advanced engineering.
NREL researchers build a 13-m thermoplastic blade at NREL’s CoMET facility. Photo from the National Wind Technology Center at the NREL Flatirons Campus. (Photo by Ryan Beach / NREL)
A team of National Renewable Energy Laboratory (NREL) researchers are furthering their revolutionary combination of recyclable thermoplastics and additive manufacturing (better known as three-dimensional [3D] printing) to manufacture advanced wind turbine blades. The advance was made possible by funding from the U.S. Department of Energy’s Advanced Manufacturing Office—awards designed to stimulate technology innovation, improve the energy productivity of American manufacturing, and enable the manufacturing of cutting-edge products in the United States.
Led by NREL senior wind technology engineer Derek Berry, the team’s novel techniques could revolutionize how wind turbine blades are manufactured.
Today, most utility-scale wind turbine blades have the same clamshell design: two fiberglass blade skins are bonded together with adhesive and use one or several composite stiffening components called shear webs. This manufacturing process has been optimized for efficiency over the past 25 years—but, in reality, it has changed very little.
To make wind turbine blades lighter, longer, less expensive, and more efficient at capturing wind energy—improvements critical to the Biden Administration’s goal to cut greenhouse gas emissions in part by increasing wind energy production—researchers must entirely rethink the conventional clamshell.
To start, the NREL team is focusing on the resin matrix material. Current designs rely on thermoset resin systems like epoxies, polyesters, and vinyl esters, polymers that, once cured, cross-link like brambles.
“Once you produce a blade with a thermoset resin system, you cannot reverse the process,” Berry said. “That makes the blade difficult to recycle.” As more and more wind turbines are installed every year, new wind turbine blades should be designed to be repurposed or even recycled to prevent them from undercutting the green economy they are meant to help build.
Derek Berry and his team of NREL researchers did just that. Working with the Institute for Advanced Composites Manufacturing Innovation in NREL’s Composites Manufacturing Education and Technology (CoMET) Facility, the multi-institution team developed systems that use thermoplastics, which, unlike thermoset materials, can be heated to separate the original polymers, enabling end-of-life recyclability.
Thermoplastic blade parts can also be joined using a thermal welding process that could eliminate the need for adhesives—often heavy and expensive materials—further enhancing blade recyclability.
“With two thermoplastic blade components, you have the ability to bring them together and, through the application of heat and pressure, join them,” Berry said. “You cannot do that with thermoset materials.”
Moving forward, NREL, along with project partners TPI Composites, Additive Engineering Solutions, Ingersoll Machine Tools, Vanderbilt University, and the Institute for Advanced Composites Manufacturing Innovation, will develop innovative blade core structures to enable the cost-efficient production of high-performance, very long blades—well over 100 meters in length—that are relatively low weight.
By using 3D printing, the research team can produce the kinds of revolutionary designs needed to modernize turbine blades with highly engineered, net-shaped structural cores of varying densities and geometries between the structural skins of the turbine blade. The blade skins will be infused using a thermoplastic resin system.
If they succeed, the team will reduce turbine blade weight and cost by 10% (or more) and production cycle time by at least 15%, a huge leap (or pirouette) for wind energy technology.
In addition to the prime AMO FOA award for additively manufactured thermoplastic wind turbine blade structures, two subgrant projects will also explore advanced wind turbine manufacturing techniques. Colorado State University is leading a project that also uses 3D printing to make fiber-reinforced composites for novel internal wind blade structures, with Owens Corning, NREL, Arkema Inc., and Vestas Blades America as partners. The second project, led by GE Research, is dubbed AMERICA: Additive and Modular-Enabled Rotor Blades and Integrated Composites Assembly. Partnering with GE Research are Oak Ridge National Laboratory, NREL, LM Wind Power, and GE Renewable Energy.
Learn more about NREL’s advanced manufacturing and wind energy research and explore the CoMET capabilities.
Article courtesy of National Renewable Energy Laboratory (NREL).
The mission of the U.S. Energy Department is to ensure America’s security and prosperity by addressing its energy, environmental and nuclear challenges through transformative science and technology solutions. Learn more.
#1 most loved electric vehicle, solar energy, and battery news & analysis site in the world. Support our work today!
Advertise with CleanTechnica to get your company in front of millions of monthly readers.
The projects will be led by researchers at DOE’s Los Alamos National Laboratory and Pacific Northwest National Laboratory as well as the University of...
Researchers at the U.S. Department of Energy’s (DOE’s) National Renewable Energy Laboratory (NREL) made a technological breakthrough and constructed a perovskite solar cell with...
The most important thing to know about working in the clean energy transition is that we need people from every background, every community, every...
Two New DOE Offices Will Support the Bipartisan Infrastructure Law’s Investments to Modernize the Electric Grid, Help States, Communities, Tribes and Territories Build Out...
Copyright © 2021 CleanTechnica. The content produced by this site is for entertainment purposes only. Opinions and comments published on this site may not be sanctioned by and do not necessarily represent the views of CleanTechnica, its owners, sponsors, affiliates, or subsidiaries.