Bi-metallic wear plates laminated wear liners
>Material,
ASTM A532 15/3 CrMo white iron casting , chemical composition ( percentage )
Q235 mild steel backing , chemical composition ( percentage )
Applications---Typical applications include the following for the Surge, Mining, Steel, Re-cycling, OEM, Aggregate and other Heavy Industries (to name only a few of the countless applications):
Chute Linings Ore Chutes Crusher Chutes Coal Transfer Chutes
Tripper Chutes Flop Gates Surge Bin Liners Bucket Liners
Rock Box Liners Skip Liners Trough Liners Apron Feeder Liners
Draglines Shovels Screen Plates Loaders
Wear Aprons Concentration Bins Reclaimer Buckets
Loading Pocket Liners Transition Pieces Conveyor Transfer Points
Bolt Protectors Grizzly Bars Rock Box Edges
Hopper Edges Lip Protectors Adaptor Protectors
Deflector Plates Splitter/Divider Plates Wear Pads
Fan Blades Jaw Crushers Hammer Mill Inserts
Knife Inserts Crusher Bars Rolling Mill Guides
Run Out Rolls Dump Hoppers Crusher Hoppers
Floor Liners Arm & Hub Liners Truck Bed Liners
Bucket Liners Impact Wall Liners Distribution Plates
Elastomer Bonded Liners (Noise Reduction) Vibratory Feeders
Hopper (Receiving & Discharge) Liners Bucket Wheel Protection
Wear Plates
Available in a wide range of sizes, Hyster wear Plates can be used in a combination of our standard sizes to create optimum layouts that provide the greatest impact and wear protection.
Suitable for use in chutes, hoppers, bins, liners, impact walls, rock boxes and a variety of other applications.
Very easy to use, no pre or post heating when welding.
*Unit: Millimeter (mm)
HP200-1 200X200X18
HP200-2 200X200X20
HP300-1 300X300X18
HP300-2 300X300X20
For laminate bi-metallic wear plate, the biggest size we can make is 900x600mm, do not need to be joint
>Material,
ASTM A532 15/3 CrMo white iron casting , chemical composition ( percentage )
C | Cr | Mo | Si | Mn | Ni | Cu | P | S |
2.0-3.3 | 14-18 | ≤ 3.0 | ≤ 1.5 | ≤ 2.0 | ≤ 2.5 | ≤ 1.2 | ≤ 0.1 | ≤ 0.06 |
Q235 mild steel backing , chemical composition ( percentage )
C | Si | Mn | P | S | Cr | Ni | Mo | Cu |
0.2 | 0.35 | 1.4 | 0.045 | 0.05 | 0.3 | 0.3 | 0.3 | 0.3 |
Applications---Typical applications include the following for the Surge, Mining, Steel, Re-cycling, OEM, Aggregate and other Heavy Industries (to name only a few of the countless applications):
Chute Linings Ore Chutes Crusher Chutes Coal Transfer Chutes
Tripper Chutes Flop Gates Surge Bin Liners Bucket Liners
Rock Box Liners Skip Liners Trough Liners Apron Feeder Liners
Draglines Shovels Screen Plates Loaders
Wear Aprons Concentration Bins Reclaimer Buckets
Loading Pocket Liners Transition Pieces Conveyor Transfer Points
Bolt Protectors Grizzly Bars Rock Box Edges
Hopper Edges Lip Protectors Adaptor Protectors
Deflector Plates Splitter/Divider Plates Wear Pads
Fan Blades Jaw Crushers Hammer Mill Inserts
Knife Inserts Crusher Bars Rolling Mill Guides
Run Out Rolls Dump Hoppers Crusher Hoppers
Floor Liners Arm & Hub Liners Truck Bed Liners
Bucket Liners Impact Wall Liners Distribution Plates
Elastomer Bonded Liners (Noise Reduction) Vibratory Feeders
Hopper (Receiving & Discharge) Liners Bucket Wheel Protection
Wear Plates
Available in a wide range of sizes, Hyster wear Plates can be used in a combination of our standard sizes to create optimum layouts that provide the greatest impact and wear protection.
Suitable for use in chutes, hoppers, bins, liners, impact walls, rock boxes and a variety of other applications.
Very easy to use, no pre or post heating when welding.
*Unit: Millimeter (mm)
HP200-1 200X200X18
HP200-2 200X200X20
HP300-1 300X300X18
HP300-2 300X300X20
For laminate bi-metallic wear plate, the biggest size we can make is 900x600mm, do not need to be joint